The short answer
LLumar window tint starting at $295. All LLumar lines are available. Your written quote confirms the exact series, shade, vehicle coverage, removal charges and installed total.
Choose the exact film by coverage, budget, published specifications and warranty. Carbon, dyed and ceramic are separate categories; LLumar ATC is dyed, not carbon. No single category label guarantees a particular installed price or temperature improvement.
Dyed, carbon and ceramic are different product categories. LLumar identifies ATC as dyed window film, not carbon. ATC uses an integrated charcoal dye for color stability, and LLumar states that it blocks more than 99% of UV rays.
LLumar's ceramic range includes CTX, IRX, FormulaOne Pinnacle and FormulaOne Stratos. Compare the exact series and shade for heat rejection, visible light transmission and reflectance; the category name is not a performance specification.
Ask PLM to confirm the exact film available for your vehicle in the written quote. A carbon-tint comparison is not a representation that ATC is carbon or that every listed manufacturer series is currently stocked.
What ceramic tint actually is
LLumar describes ceramic film as using nano-ceramic technology to reduce solar heat and improve comfort. Compare its CTX, IRX and FormulaOne products by exact series and shade rather than assuming every ceramic film has the same performance.
Ceramic film can reduce solar heat entering through treated glass, but the result depends on the exact film, shade, glass, coverage and conditions. Compare total solar energy rejection (TSER) for the same test basis. Infrared-rejection figures can use different wavelength ranges and are not interchangeable with TSER. No fixed cabin-temperature reduction, cool-down time, energy saving or EV-range gain is promised.
Product references: LLumar ATC dyed film; LLumar ceramic films and limited-warranty summary; LLumar performance data.
Carbon is not a synonym for dyed film
Carbon refers to a film category marketed for carbon-based construction. It should not be used as a generic name for all lower-priced or non-metallic tint. LLumar ATC is a dyed product, and its integrated charcoal dye is designed for color stability.
Ask for the exact product and manufacturer specifications. Do not assume every carbon product is stocked by PLM, has a lifetime warranty, or performs identically.
Product references: LLumar ATC dyed film; LLumar ceramic films and limited-warranty summary; LLumar performance data.
Compare the product, not the label
Compare VLT, TSER, reflectance, the defined IR metric, UV performance and installed coverage on the same test basis. Ask for the actual manufacturer's data rather than generic category percentages.
No fixed temperature advantage, permanent fade immunity, medical protection guarantee or universal two-to-one price ratio is claimed.
LLumar describes its automotive tint warranty as a manufacturer's limited lifetime warranty, subject to written terms. FormulaOne products have separate transferable coverage with restrictions. Do not assume every film warranty transfers, covers accidental damage or guarantees free replacement in every case. Confirm the exact product warranty, eligibility, registration requirements and any separate PLM workmanship terms in the quote.
Confirm the film and legal coverage
Request a written quote identifying the film manufacturer, series, shade, windows covered and installed price. Confirm existing-film removal, taxes, preparation, availability, completion estimate and warranty terms before authorizing work. Do not compare different film categories or coverage packages as if they were the same product.
The following summary is based on Texas DPS window-tint guidance. Film shade alone is not a compliance test.
- Front side windows: at least 25% VLT and no more than 25% luminous reflectance, measured with film and original glass together, unless an applicable exemption applies.
- Rear side windows: exempt from these Texas tint restrictions; this is not a sedan-versus-SUV distinction.
- Rear window: unrestricted only with an outside mirror on each side giving a view at least 200 feet behind the vehicle. Without those mirrors, at least 25% VLT and no more than 25% reflectance apply.
- Windshield: the strip must be above the AS-1 line; if there is no line, it must end five inches below the top. Combined strip/glass VLT must be at least 25%, reflectance no more than 25%; no red, amber or blue. Clear, untinted UV film is separately allowed anywhere on the windshield.
For a medical exception to the front-side darkness requirement, DPS calls for a signed statement from a licensed physician or licensed optometrist identifying the driver or occupant and explaining the medical necessity. Keep the statement in the vehicle for law-enforcement review. DPS stopped issuing Window Tint Exemption Certificates on January 1, 2019. A customer-signed shop waiver is not a medical exception or permission to use otherwise noncompliant tint on public roads.
Verify the exact film, glass and installation before choosing a shade. A shop waiver or a nominal film percentage does not guarantee legality. Read the complete Texas tint guide.
Keep reading
Ready to spec your tint?
Text 210-759-9994 with your vehicle year/make/model and we’ll send back a written quote for both film tiers so you can choose without pressure.